

??????供貨標準:VARGAL? Normal
參考標準:UIN 9319
產品材質:Steel / Stainless Steel
產品涂層:Zinc plated / ZFSHL
產品性能:ST-8/10 ; A2-70/A4-80
關于 VARGAL®
VARGAL®彈簧自鎖螺母是一種依靠外置彈簧環為鎖緊元件的防松螺母。其主要通過徑向變形來達到鎖緊目的的一款特色螺母,在震動環境中防松效果明顯。當螺母旋入螺栓穿過其自身端部鎖緊位置時,螺紋間的摩擦力使得螺母鎖緊部位的螺紋在徑向上擴張引起彈簧環對螺母施加反作用力,從而對連接副起到了鎖緊作用。
VARGAL® 優勢
VARGAL® 鎖緊螺母通過彈簧鎖緊部件的彈性變形實現配合螺紋徑向鎖緊,其在震動環境中鎖緊效果表現優異:
> 優異的抗振動性。
> 高溫應用。
> 得益于新型彈簧鎖緊元件,其在安裝過程中產生的摩擦進一步分散減小。
> 即使在多次裝配后,彈簧鎖緊螺母的鎖緊效果也不會出現明顯的下降。
VARGAL® 材質與標記
MATERIAL | DIAMETER | PROPERTY CLASS | HARDNESS HV 30 | ||
VARGAL STANDARD | VARGAL LOW | MIN | MAX | ||
Free machining steel | M3-M24 | 8 | 04 | 188 | 302 |
10 | 05 | 240 | 353 | ||
Carbon steel | M27-M36 | 8 | 04 | 188 | 302 |
10 | 05 | 240 | 353 | ||
Stainless steel | M5-M36 | A2- 70 | A2-035 | - | - |
M27-M36 | A4-80 | A4-040 | - | - |
The marking on the nut means its property class. The fitting has to be carried out with screws belonging to the same corresponding property class:
- Property class 8 or 04 nuts must be screwed on 8.8 screws;
- Property class 10 or 05 nuts must be screwed on 10.9 screws;
- A2 nuts must be screwed on A2 or A4 70/80 screws or on high strength screws (minimum 10.9);
- A4 nuts must be screwed on A4 70/80 screws or on high strength screws (minimum 10.9)
PROOF LOAD
VARGAL® 10 nuts surpass the proof load required by the standard EN ISO 2320, table below. (extract from EN ISO 898-2)
VARGAL® 供貨范圍
材料 | 材質 | 性能等級 | 涂層簡稱 | 表面處理 | 常規供貨范圍 | RoHS | 其他 |
碳鋼 | ST | 8 | Zinc plated | 電鍍鋅 | M3-M36 | ||
碳鋼 | ST | 8 | ZFSHL | 非電解鋅片涂層 | M3-M36 | Yes | |
碳鋼 | ST | 10 | Zinc plated | 電鍍鋅 | M5-M36 | ||
碳鋼 | ST | 10 | ZFSHL | 非電解鋅片涂層 | M5-M36 | Yes | |
不銹鋼 | A2 | 70 | Plain | 本色 | M5-M36 | ||
不銹鋼 | A4 | 80 | Plain | 本色 | M5-M36 |
* 本表所示VARGAL® 彈簧自鎖螺母數據僅供參考,與產品相關的標準、規格、涂層、性能等具體參數,請以我司實際報價和供貨為準。
本頁面VARGAL® 彈簧自鎖螺母產品以常規供貨為主,低于M5規格以及具體產品信息請與本公司銷售咨詢。
* 符合以下情形,需要與我司銷售人員咨詢:
如需訂購其他近似標準產品,請咨詢。
本表所示數據僅為常規供貨范圍,特殊訂貨產品,請咨詢。
涉及企業標準驗收、特殊質量協議及要求、特殊證明,請咨詢。
VARGAL ® 尺寸
STANDARD PITCH / FINE PITCH
* 本表數據僅供參考,產品具體參數請以我司銷售人員最終確認為準!
關于 VARGAL®
VARGAL®彈簧自鎖螺母是一種依靠外置彈簧環為鎖緊元件的防松螺母。其主要通過徑向變形來達到鎖緊目的的一款特色螺母,在震動環境中防松效果明顯。當螺母旋入螺栓穿過其自身端部鎖緊位置時,螺紋間的摩擦力使得螺母鎖緊部位的螺紋在徑向上擴張引起彈簧環對螺母施加反作用力,從而對連接副起到了鎖緊作用。
VARGAL® 優勢
VARGAL® 鎖緊螺母通過彈簧鎖緊部件的彈性變形實現配合螺紋徑向鎖緊,其在震動環境中鎖緊效果表現優異:
> 優異的抗振動性。
> 高溫應用。
> 得益于新型彈簧鎖緊元件,其在安裝過程中產生的摩擦進一步分散減小。
> 即使在多次裝配后,彈簧鎖緊螺母的鎖緊效果也不會出現明顯的下降。
VARGAL® 材質與標記
MATERIAL | DIAMETER | PROPERTY CLASS | HARDNESS HV 30 | ||
VARGAL STANDARD | VARGAL LOW | MIN | MAX | ||
Free machining steel | M3-M24 | 8 | 04 | 188 | 302 |
10 | 05 | 240 | 353 | ||
Carbon steel | M27-M36 | 8 | 04 | 188 | 302 |
10 | 05 | 240 | 353 | ||
Stainless steel | M5-M36 | A2- 70 | A2-035 | - | - |
M27-M36 | A4-80 | A4-040 | - | - |
The marking on the nut means its property class. The fitting has to be carried out with screws belonging to the same corresponding property class:
- Property class 8 or 04 nuts must be screwed on 8.8 screws;
- Property class 10 or 05 nuts must be screwed on 10.9 screws;
- A2 nuts must be screwed on A2 or A4 70/80 screws or on high strength screws (minimum 10.9);
- A4 nuts must be screwed on A4 70/80 screws or on high strength screws (minimum 10.9)
PROOF LOAD
VARGAL® 10 nuts surpass the proof load required by the standard EN ISO 2320, table below. (extract from EN ISO 898-2)
VARGAL® 供貨范圍
材料 | 材質 | 性能等級 | 涂層簡稱 | 表面處理 | 常規供貨范圍 | RoHS | 其他 |
碳鋼 | ST | 8 | Zinc plated | 電鍍鋅 | M3-M36 | ||
碳鋼 | ST | 8 | ZFSHL | 非電解鋅片涂層 | M3-M36 | Yes | |
碳鋼 | ST | 10 | Zinc plated | 電鍍鋅 | M5-M36 | ||
碳鋼 | ST | 10 | ZFSHL | 非電解鋅片涂層 | M5-M36 | Yes | |
不銹鋼 | A2 | 70 | Plain | 本色 | M5-M36 | ||
不銹鋼 | A4 | 80 | Plain | 本色 | M5-M36 |
* 本表所示VARGAL® 彈簧自鎖螺母數據僅供參考,與產品相關的標準、規格、涂層、性能等具體參數,請以我司實際報價和供貨為準。
本頁面VARGAL® 彈簧自鎖螺母產品以常規供貨為主,低于M5規格以及具體產品信息請與本公司銷售咨詢。
* 符合以下情形,需要與我司銷售人員咨詢:
如需訂購其他近似標準產品,請咨詢。
本表所示數據僅為常規供貨范圍,特殊訂貨產品,請咨詢。
涉及企業標準驗收、特殊質量協議及要求、特殊證明,請咨詢。
VARGAL ® 尺寸
STANDARD PITCH / FINE PITCH
* 本表數據僅供參考,產品具體參數請以我司銷售人員最終確認為準!